-15%

MZHOU PCIe 6 SATA 4X Card, with 6 SATA Cables and Low Profile Bracket, 6 Gb/s SATA Controller PCIe Card

$38.99
0 sold
137 people are viewing this right now
10 in stock
Trust Badge
Guaranteed safe & secure checkout

Additional information

Additional information

Weight 0.19 kg
MZHOU PCIe 6 SATA 4X Card, with 6 SATA Cables and Low Profile Bracket, 6 Gb/s SATA Controller PCIe Card

MZHOU PCIe 6 SATA 4X Card, with 6 SATA Cables and Low Profile Bracket, 6 Gb/s SATA Controller PCIe Card

$38.99

Description

  • Add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card,6 large capacity storage devices can be connected. Supports 6 SATA Rev 3.0 transfer speeds of up to 6.0 Gbps / s, 3.0 Gbps and 1.5 Gbps. Support hot swappable.
  • Supports 6 SATA Rev 3.0 transfer speeds of up to 6.0 Gbps / s, 3.0 Gbps and 1.5 Gbps. Support hot swappable.
  • This PCIe SATA card contains 6 SATA cables for easy connection! You can connect 6 large capacity storage devices at the same time.
  • Support system : Windows XP / 7/8/10 / Linux. Support interface : PCI-E 4X 8X 16X.(Use under PCI-E 3.0 will be faster)
  • MZHOU is committed to providing high-quality product quality and sales services, please feel free to contact us if you have any questions, we will reply to you within 12 hours.

SATA III 6-PORT ADAPTER CARD
The PCIe X4 6 SATA 3.0 ports controller card provides a simple connection between a host computer and SATA 3.0 devices (SATA hard drive or SATA Device), which allows 6 SATA devices with a speed of up to 6 Gbit / s.

Specifications:
Follow the Serial ATA 3.0 -Specification, backward compatible with SATA2.0 SATA1.0.
Follow PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.
Supports communication speed of 6.0 Gbps, 3 , 0 Gbit / s and 1.5 Gbit / s.
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
Supports 6 SATA at full speed.
Supports the AHCI1.0 mode and IDE mode.
Support native command queue (NCQ).
Support FIS based on port multiplier switch or command switch.
Support hot swap and hot swap.
Compatible with SATA 6G, 3G and 1.5G Fes plates.
Bus interface: PCI-Express x2 GEN3 slot (actually PCI-E X2 signal, interface is X4).
Expansion interface: 6 SATA3.0 interfaces.
System requirements: It is a PCI Express X4 slot available that supports PCI-E X4 X8 X16(NOT support interface X1).
Operating system: Windows 10/8/7 (32/64 bit) / Vista (32/64 bit) / XP / 2003/2008 / Linux.

Applicable slots for motherboard PCI-Ex4 and higher

Note:
PCI, PCI-E x1 cannot be used
No driver is required for this card.
Please install the product driver if use Win7 system. The software package does not contain drivers.
If you need to install the driver, please send a message to the seller in time.

Package list
1 * PCI-E 6 ports 4x SATA 3.0 card
6 * SATA Cables
1 * Low profile bracket
1 * 5port 15pin SATA power splitter cable

Rating & Review

Based on 2 Reviews
  1. CrimsunWolfXIII
    It worked out of the box
    Right on!!! Popped this card in my poweredge R720 with 3 m.2 sata ssd’s and all were detected without any drivers etc. using Proxmox.totally recommend this.
    Helpful? 0 0
  2. Jay
    So far so good
    Used to connect a 3-HDD RAIDZ1 ZFS array, with an SSD log drive in a Proxmox homelab.

    Much less I/O delay compared to the previous USB3 JBOD tower. I probably don’t have the array configured correctly in re blocksize, which probably doesn’t help, but it adequately meets my need

    Helpful? 0 0
Language »
Select your currency
0