Voltage Converter DC 12V/24V to DC 9V 3A Power Converter DC 11-30V to 9V 3A 27W MAX Buck Converter

Description

DC 11-30V to 9V 3A Voltage Converter:

Converts DC 12V/24V to a stable 9V 3A DC output; Output power: 27W; Note: The load connected to the output side of the transformer should not exceed the specified maximum load.

Various protections:

DC Voltage Converter supports short-circuit protection, over-temperature protection, over-current protection, anti-circuit protection; converter is small, ultra-thin, easy to install; IP67 waterproof, dustproof, moisture-proof, shockproof and other functions.

Support short circuit protection: when there is a short circuit at the output end, the product stops working without output, and the output will be restored after troubleshooting.

Storage:

Store the product in a cool and dry place, avoid contact with corrosive substances, and keep away from fire and heat sources. The product adopts synchronous rectification technology, high conversion efficiency and stable performance.

Widely used:

Voltage Converter is widely used in Motor, LED light strip, monitoring system, motor, electronic system, car radio, stereo, bus, minibus, truck display, car billboards, solar panels, walkie-talkies, DIY equipment and so on.

DC/DC Voltage Converter 11V-30V to 9A 3A 27W MAX

Name： Buck Converter

Brand：Mzhou

Function：Buck

Typical Input Voltage: 12V/24V

Input Voltage Range: 11-30V DC

Output Voltage: 9V DC

Output Current: 3A

Output Power: 27W max

Transmission efficiency: 95%

Operating Temperature: -20-65°

Storage temperature: -40-85°

Operating Humidity: 10%-90%RH

Static dissipation ：≤10MA

Net weight: 35g

L*W*H: 33*22.5*21mm

Quality assurance: within 12 months of the reporting period

Heat Dissipation Method: Natural Heat Dissipation

9V 3A power transformer connection:

Input: Red (+) Black (-)
Output: Yellow (+) Black (-)
Waterproof rating: IP67 (Please note: Do not fully immerse the product in water).
Tip:
To ensure that the product is in the best working condition, it is recommended to use an input voltage of 11-30V.
Precautions:
1. Do not reverse polarity, the power supply has no reverse polarity protection, the reverse port will damage the power supply. Please note that the positive and negative polarity of the input cannot be interchanged.
2. During operation, the load cannot be overloaded, and space should be reserved for the power supply to ensure that the power supply works stably for a long time.
3. If the ambient temperature is too high during operation, the power consumption should be reduced accordingly, and the power supply can work stably for a long time under low temperature to ensure normal operation.
4. Do not use it near a heat source (such as fire or heater).
5. Do not connect the input cable to 220V power supply.
6. Do not put the product into fire or heat.
7. Do not short-circuit the positive and negative terminals of the product with wires or other metal objects.
8. Do not allow non-professionals to disassemble or repair the product.