-18%

MZHOU PCIe SATA Card 8 Port with 8 SATA Cables and Low Profile Bracket, 6Gbps SATA 3.0 PCIe Card,Support 8-Port SATA PCI-E 3.0 GEN3 Devices

$40.99
0 sold
292 people are viewing this right now
10 in stock
Trust Badge
Guaranteed safe & secure checkout

Additional information

Additional information

Weight 0.24 kg
MZHOU PCIe SATA Card 8 Port with 8 SATA Cables and Low Profile Bracket, 6Gbps SATA 3.0 PCIe Card,Support 8-Port SATA PCI-E 3.0 GEN3 Devices

MZHOU PCIe SATA Card 8 Port with 8 SATA Cables and Low Profile Bracket, 6Gbps SATA 3.0 PCIe Card,Support 8-Port SATA PCI-E 3.0 GEN3 Devices

$40.99

Description

  • ✔With this PCIe SATA card, you can add 8 SATA 3.0 6 Gbps devices to your computer .
  • ✔The PCIe SATA card contains 8 SATA cables to simplify the connection ,and low profile bracket(Need change to the low profile braket when works on slim size PCs).
  • ✔The adapter is well made, providing stable and effective data loss control. And it supports hot swap.
  • ✔Use the premium ASMedia ASM1064+JMB5XX chip to improve card stability and compatibility.
  • ✔Connect 8 mass storage devices at the same time. Compatible with Windows /8/10 Ubuntu.

 

Descriptions:
Black PCB
Bus interface: PCI-Express x1 slot
Expansion interface: 8 SATA PCI-E 3.0 GEN3 interfaces
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
System requirements: There is an available PCI Express 1X slot, which also supports PCI-E 1X 4X 8X 16X
Support FIS switch or command switch based on port multiplier.
Support hot swap and hot swap.
Operating system: Windows 10/8/ Linux(Ubuntu)

Note:
We recommend using this SATA 3.0 card in the PCIE 2.0 or 3.0 slot for the fastest speed.
SATA port multiplier is not supported if the driver is not installed.
We need to install the driver to recognize all disks.
Make sure the computer is turned off before inserting or removing the card. Then insert the card to avoid damaging the motherboard or expansion card.
If there is no CD-ROM or the driver CD can not be read, you can contact the merchant to send the driver for you.

Package Contents:
1 * SATA 3.0 expansion card
1 * Low bracket
1 * Support dirver CD disk
8 * SATA cable

Tips about disk:
Driver comes on a mini CD disk,which is a bit inconvenient For some buyers.Considering that optical CD disk are not as widely used.Please send a message to the seller in time if you need a driver.

Rating & Review

Based on 2 Reviews
  1. Sivanesh
    Use in TrueNAS Scale
    I bought the PCIe x1 8 SATA port ASM1064+573 card for my small home NAS. The system runs on a SoC motherboard with Celeron J4125 and was immediately recognized by TrueNAS Scale without any problems. I connected four HDDs and all were immediately available in TrueNAS – no drivers had to be installed. I can’t say anything about performance yet, but the installation was problem-free.
    Helpful? 0 0
  2. Chris
    Simply works
    As with pretty much all PCIE cards, installation is very simple. A half-height slot bracket is supplied, but I didn’t need it. So I can’t say much about changing the bracket, but it looked doable. The Sata cables supplied could be a bit short, depending on the case. I have this expansion card in a Fractal Node 804 in which the cables have to go to the front, through the cable duct and then back to the hard disk holder. That just about works. However, the cables must not be 2 cm shorter. I guess the second HDD cage will be better, but it is not in use yet.
    In Proxmox I could not simply pass the card on as a PCIE device but had to give the TrueNAS VM the hard disks individually. PCIE passtrough is a bit beginner-unfriendly, maybe it does work, but I wasn’t competent enough. In any case, all hard disks were recognized immediately and work perfectly.
    Helpful? 0 0
Language »
Select your currency
0