MZHOU DC 12V 24V to 5V 5A Step-Down Converter，8-35V DC Buck Converter to 5A 25W, Power Transformer, DC to DC voltage regulator, Variable Converter,for Lights, Speakers, Water Pumps, Radios, Car Trucks

Description

• DC 8-35V to 5V 5A Voltage Converter: Converts DC 12V/24V to a stable 5V 5A DC output signal; Output power: 25W; Note: The load connected to the output of the transformer should not exceed the specified maximum load.
• Meet DIY requirements: The DC converter can be installed by yourself, just remove the screws on the four ports, strip the insulation on the wires with appropriate length, wrap the copper wire around the connector and screw the screws back on.
• Short-circuit protection support: when the output is short-circuited, the product stops working without output, and the output will be restored after troubleshooting. This product has no input reverse connection protection, please pay attention to the correct input, negative reverse connection, will lead to permanent damage to the product.
• Product working environment temperature: -20-65℃, when the working environment temperature is 35℃, in order to extend the service life of the power supply, please use 50% of the rated output current.
• Widely used: Voltage regulators are widely used in LED light strips, monitoring systems, motors, electronic systems, car radios, stereos, buses, minibuses, truck displays, car billboards, solar panels, walkie-talkies, DIY equipment and so on.

12/24V to 5V 5A DC Step Down Converter Regulator Specifications

Input Voltage DC 5V

Input Voltage Range DC 8-35V

Efficiency: Over 90% (at 12V/24V input)

Output Voltage DC 5V

Output current: 5A

Output power: 25W

Length*Width*Height: 63*53*20 mm

Net weight: 75g

Working temperature:-20-65°C

Storage temperature:-40-85°C

Working Humidity:10%-90%RH

8-35V to 5V 5A Buck Voltage Regulator Converter Safety Manual

1. The accuracy of voltage measuring instruments shall not be less than 0.5 grade, and the internal resistance shall not be less than 10 KΩ/V. The accuracy of instruments used for temperature measurement shall not be less than ± 1℃.

2. The load connected to the output of the voltage regulator should not exceed the maximum value. Any greater load will damage the voltage regulator.

3. Product operating ambient temperature: -20-65°C. When the operating ambient temperature is 35°C, use 50% of the rated output current in order to extend the service life of the power supply.

4.The output power of the converter must be greater than the power required by the connected electrical appliances.

5. Non-professionals are not allowed to disassemble and repair by themselves.

6. Do not use it near a heat source (such as fire or heater).

7. Do not connect the input cable to 220V power supply.

8. Do not put the product into fire or heat.

9. Do not short-circuit the positive and negative terminals of the product with wires or other metal objects (positive and negative wires should not be reversed).

Package Includes

1x DC to DC Voltage Regulator 5V 5A Converter

1x Screwdriver