-21%

MZHOU DC 9-36V to 12V Boost Buck Converter,12V 24V to 12V 3A 36W MAX Voltage Regulator Transformer,Step Up Step Down Converter,Inverter Power Supply Down Module for Trucks, Instruments,Car,TV Screen

$18.99
0 sold
166 people are viewing this right now
10 in stock
Trust Badge
Guaranteed safe & secure checkout
MZHOU DC 9-36V to 12V Boost Buck Converter,12V 24V to 12V 3A 36W MAX Voltage Regulator Transformer,Step Up Step Down Converter,Inverter Power Supply Down Module for Trucks, Instruments,Car,TV Screen

MZHOU DC 9-36V to 12V Boost Buck Converter,12V 24V to 12V 3A 36W MAX Voltage Regulator Transformer,Step Up Step Down Converter,Inverter Power Supply Down Module for Trucks, Instruments,Car,TV Screen

$18.99

Description

  • DC 9-36V to 12V3A voltage converter: it can convert DC 9-36V into a stable 12V 3A DC output signal; Output power: 36W; Note: the load connected to the output end of the transformer should not exceed the specified maximum load
  • Meets the needs of do-it-yourself: the DC inverter can be installed on your own with suitable wires; just remove the screws on the four ports, strip the wires of the appropriate length of insulation, copper wire around the interface and then screw the screws; note: do not reverse the positive and negative posts of the input and output terminals
  • DC 36V to 12V backward converter: accepts advanced intelligent chip; provides reverse polarity protection; short circuit; overheat protection; overvoltage protection; to ensure equipment safety
  • Wide range of applications: voltage regulator is widely used in LED light bar; surveillance systems; motors; electronic systems; car radios; audio; buses; minibuses; truck display; cab billboards; solar panels; walkie-talkies; do-it-yourself equipment etc.
  • DC Step Down Converter: required for car audio system or other 5V car products; particularly suitable for vehicles with 24V power supply

 

Specifications 12 V DC controller.

Input voltage: DC 12 V.

Input voltage range: DC 9-36V.

Efficiency: more than 90% (at 24 V input).

Output voltage: DC 12 V.

Output current: 3 A

Output power: 36 W

L x W x H: 51 x 54 x 21 mm.

Net weight: 50 grams.

12 V voltage regulator safety manual

1st The load connected to the output of the voltage regulator must not exceed the MAX. Indicated load power, any higher load will result in damage to the voltage regulator.

2nd In the process of use when the ambient temperature is too high, the use of power should be reduced and low temperature operation is guaranteed that the power supply can work reliably for a long time.

3. Positive and negative wires should not be interchanged.

4. The input cable should not be connected to the 220V network.

5. The output power of the converter should be greater than the power required by the connected devices.

Delivery Contents:

1x DC to DC voltage stabilized converter 12V 3A

1 x screwdriver.

Rating & Review

Based on 0 Reviews

There are no reviews yet.

Language »
Select your currency
0