MZHOU DC 9-32V to 12V 20A 240W MAX DC Regulator Converter, DC 12V/24V Step-Down to 12V DC Regulator with Waterproof Fuse and Terminals, Power Converter Transformer Buck Converter

Description

• DC 9-32V to 12V20A VOLTAGE CONVERTER: This 12V voltage stabilizer can convert DC 9-32V to DC 12V.You don’t need to worry about overvoltage/mismatch and other bad conditions. Voltage Input: DC 9-32V, Output: DC 12V, Maximum Current: 20A 240W.Please note: Do not reverse the positive and negative polarity.
• STABLE TRANSMISSION RATE: the conversion efficiency of the converter is up to 95%, the output is stable, and at the same time, it has short-circuit and over-current protection, which is safer and more secure
• FUSE SAFETY: For the safety of the user, our DC-DC voltage converters are equipped with a fuse. If the voltage is too high, the circuit is faulty or abnormal, the fuse will blow and the transformer will stop working, thus protecting the equipment. This also reduces the risk of fire or explosion.12V Automatic Voltage Regulator uses non-isolated synchronous buck technology, the transformer will not heat up when working, which is safer.
• IPX-7 WATERPROOF RATING:The DC 12V 20A stabilized converter is dustproof, waterproof and shockproof, which ensures that the internal electronic components are isolated from the external environment, and at the same time, it can withstand heavy outdoor rain or bad weather.
• Wide Application:The current transformer can be used in vehicles, security systems, hospital equipment, telecommunications and other fields. It is widely used in LED light bars, surveillance systems, motors, electronic systems, car radios, stereos, buses, minibuses, truck displays, cab advertising panels, solar panels, walkie-talkies, DIY and so on.

12V DC regulator Specifications:

Input: DC 9-32V

Output: DC 12V 20A（Max)

Waterproof rating: IPX7

Output power: 240W MAX

12V regulator connection:

Input: red(+) black(-)

Output: yellow(+) black(-)

Protection: Protection against transient high voltage at input, protection against overcurrent at output.

(Please note that there is no reverse polarity protection, please connect the wires correctly, otherwise the current may be burned)

DC voltage regulator safety manual

1. the load connected to the output of the power regulator should not be higher than the maximum load power, any higher load will damage the power regulator.

2. If the ambient temperature is too high, the power should be reduced accordingly. Operation at low temperature is a guarantee that the power supply will work reliably for a long time.

3. Do not use the device near heat sources such as fire or heaters.

4. do not connect the input cable to the 220 V household mains.

5 Do not place the appliance near a fire or heater.

6. the appliance must not be disassembled and maintained by non-professionals.

7. the input voltage should not exceed the fluctuation range of the converter.

8. The output power of the converter must be greater than the power required by the connected devices.

9. Positive and negative wires must not be reversed.

Package Included

1x DC voltage converter 9V-32V to 12V 20A 240W