MZHOU 12v to 24v DC Step Up Converter,10-20V Voltage Booster to 24V 3A 72W Max Current Adapter,Voltage Booster Converter,DC up to Voltage Regulator,Voltage Booster Transformer for car radios, Audio

Description

• 12V to 24V converter: This 12V to 24V voltage converter converts DC 12V to DC 24V;Voltage input: DC 12V;Output: DC 24V;Maximum current: 3A 72W;WARNING:Please confirm the positive and negative polarity of the power supply before wiring
• Application: Our 12 V step-up converter module can be used for integrated cabling; monitoring of fire alarm systems; car radios; audio; bus; minibus; truck screens; cab advertising screens; LCD TVs; LEDs; solar power systems; intercoms and more
• Multi-protection: This voltage stabilizer has output overcurrent protection;output short-circuit protection;input undervoltage protection;chip high-temperature protection
• Meet the needs of DIY: the DC converter can be installed on their own with suitable wires; simply remove the screws on the four ports, strip the wires of the appropriate length of insulation, copper wire around the interface and then screw the screws can be; Note: Do not reverse the positive and negative poles of the input and output terminals
• Caution: Never operate electrical appliances permanently at the power limit; this can lead to damage; make sure that the cables are intact and the polarity of the connections is correct

12 V to 24V 3A DC Step Up converter regulator Specifications

Input voltage: DC 12 V

Efficiency: Over 90%（at 24V input）

Output voltage: DC 24 V

Output current: 3 A

Output power: 72 W

L*W*H: 51*54*21 mm

Net weight: 50 G

12V to 24V 3A Booster Voltage Regulator Safety Manual

1.the load connected to the output of the voltage regulator should not be higher than the MAX. Any higher load will cause damage to the voltage regulator

2.In the process of use, if the ambient temperature is too high, should be appropriate to reduce the use of power, low-temperature operation is a guarantee that the power supply can work reliably for a long time

3.positive and negative wires must not be reversed

4.the input cable must not be connected to the 220V household power supply

5.the output power of the converter must be greater than the power required by the connected devices.

Package contains

1x DC 12V to DC 24V 3A voltage stabilized converter

1x screwdriver