MZHOU M.2(A+E Key) to 2 Ports SATA3.0 6G Multiplier Free Driver
![Trust Badge](http://beyimei.com/wp-content/themes/minimog/assets/woocommerce/product-trust-badge.png)
Additional information
Additional information
Weight | 0.1 kg |
---|
![MZHOU M.2(A+E Key) to 2 Ports SATA3.0 6G Multiplier Free Driver](https://mzhou.com/wp-content/uploads/2024/01/1-11-60x60.webp)
MZHOU M.2(A+E Key) to 2 Ports SATA3.0 6G Multiplier Free Driver
Description
- ✅【2 standard SATA ports】 You only need to insert this card into the M.2 slot of the motherboard, and then connect 2 SSD solid state drives or mechanical hard drives with SATA ports at the same time through the SATA data cable.
- ✅【High-speed transmission】This product can be converted to 2ports SATA interfaces through the M.2 (A+E Key) slot of the PC host. Using PCI-E3.0 bandwidth, data transmission speed is much faster than PCI-E2.0.
- ✅【Widely used 】The card widely used in PC computers, servers, industrial computers, consumer electronic equipment, storage devices, NVR/DVR systems.
- ✅【JM582 chip master 】 Using the latest JMB582 chip solution, high-speed transmission and stable performance, is committed to meet users’ demand for mass data space.
- ✅【Quality buying experience】MZHOU is committed to bringing users and gamers faster, lower power consumption, high reliability and high performance storage solutions.
M.2(A+E Key) to 2 ports SATA 6G Multiplier
This product can be connected to 2ports SATA interfaces through the M. 2 (A+E Key) slot of the PC host, and you can connect 2 SSD solid state drives or mechanical hard drives with SATA interfaces at the same time through the SATA data cable.
This product uses super PCIe3.0 total bandwidth, faster data transmission speed, and brings users and players a faster, lower performance, and highly stable storage device.
Features
Supports one lane of PCI Express.
Support NGFF (M.2) 2230 A/E Key.
Complies with PCI Express Base Specification Revision 3.1a.
Supports PCIe link layer power saving mode.
Supports 2 SATA port.
M.2 A+E Key.
Supports Port Multiplier.
Complies with SATA Specification Revision 3.2.
Supports command-based and FIS-based for Port Multiplier.
Supports AHCI mode and IDE programming interface.
Supports Native Command Queue (NCQ).
Supports SATA link power saving mode (partial and slumber)
Supports SATA plug-in detection capable.
Supports drive power control and staggered spin-up.
Supports SATA Partial / Slumber power management state.
System Requirements
Windows 7 (X86/X64)
Windows 8/8.x / 10/11 (X86/X64) (Windows in-box driver)
Linux-base OS
Package Contents:
1 x M.2(A+E Key) to 2-port SATA card
1 x Mounting screw
2 x SATA cables
Rating & Review
There are no reviews yet.