MZHOU DC 12V to 24V 3A MAX Boost Converter,10-22V to 24V DC-DC Voltage Regulator Module Converter, IP67 Waterproof Power Supply for Trucks,Screens etc

Description

• DC 12V to 24V 3A Boost Converter : Input voltage range: 15-35V; Rated input voltage: 12V; Output voltage: 24V; Output current: 3A MAX; Output power: 72W MAX.
• Easy to Use : Strip the wires about 10 mm (0.4 inches) and insert them into the terminals. This voltage boost regulator is equipped with a lever nut connection for quick connection. No wiring is required, reducing wiring time.
• Fuse Protection Function: The 15-35V to 24V3A boost Voltage Regulator converter is equipped with over-current/short-circuit/over-temperature protection fuses to ensure good safety during conversion work.
• IP67 Waterproof Function: DC-DC Power supply transformer adopts non-isolated synchronous step-up technology, with IP67 waterproof function.
• Wide Range of Applications: DC-DC waterproof boost converter is widely used in cars, trucks, surveillance systems, navigators, car recorders, advertising screens, medical equipment, instruments and meters, LED light bars, electric fans and DIY and so on.

DC 10-22V to 24V 3A 4L Boost Converter：

Input range： 15-35V

Rated input voltage：12V

Transfer efficiency：95%

Incoming line：15-16CM(R+ B-)

Output voltage：24V

Output：3A MAX

Maximumoutput：72W MAX

No-load adjustment rate：2%

Load regulation：3%

Quiescent dissipation：≤20MA

Ripple wave：300mVP-P

The oscilloscope bandwidth is 20 MHz, and the test end is connected with 10 μ F electrolytic capacitor and 0.1 μ F ceramic capacitor.

Outlet line：15-16CM(Y+ B-))

Enviromental Parameter：

Working temperature：-20-65°

Storage temperature：-40-85°

Working humidity：10%-90%RH

Defencive Function：

classification of waterproof：IP67

Other：

Weight：0.22 lb

Size：2.60*2.24*0.87 inch

Heat dissipation method：natural heat dissipation

Matters need Attention

1.The products are stored in a dry and cool place with a temperature range of-40℃ ~80℃, and avoid contact with corrosive substances, and stay away from fire and heat sources.

2.Do not use it near a heat source (such as a fire or a heater).

3.Do not connect the input line to 220V electricity.

4.Do not put the product into the fire or heat it.

5.Do not short-circuit the positive or negative poles of the product with wires or other metal objects.

6.Non-professional personnel are prohibited to disassemble and repair by themselves.