MZHOU DC 12V 24V to 5V Step Down Converter Regulator 3A 15W Power Adapter Buck Converter Waterproof DC-DC Step Down Module for Car

Description

• Buck Converter : Input voltage range: 8-32V; Rated input voltage: 12/24V; Output voltage: 5V; Output current: 3A MAX; Output power: 25W MAX.
• Easy to Use : Strip the wires about 10 mm (0.4 inches) and insert them into the terminals. This voltage step-down regulator is equipped with a lever nut connection for quick connection. No wiring is required, reducing wiring time.
• Fuse Protection Function : The 8-32V to 5V3A buck converter is equipped with over-current/short-circuit/over-temperature protection fuses to ensure good safety during conversion work.
• IP67 Waterproof Function: DC-DC transformer adopts non-isolated synchronous step-down technology, with IP67 waterproof function.
• Wide Range of Applications: DC-DC waterproof step-down converter is widely used in cars, trucks, surveillance systems, navigators, car recorders, advertising screens, medical equipment, instruments, LED strips, electric fans, DIY and other fields.

Electrical parameters
input parameter
Input range：8-32V
Rated input voltage：12/24V
transfer efficiency：95%
incoming line：15-16CM(R+ B-)

out parameter
output voltage：5V
Output：3A MAX
Maximumoutput：15W MAX
No-load adjustment rate：2%
load regulation：3%
quiescent dissipation：≤20MA
ripple wave：200mVP-P
The oscilloscope bandwidth is 20 MHz, and the test end is connected with 10 μ F electrolytic capacitor and 0.1 μ F ceramic capacitor.
outlet line：15-16CM(Y+ B-)

enviromental parameter
working temperature：-20-65°
Storage temperature：-40-85°
Working humidity：10%-90%RH

defencive function
classification of waterproof：IP67

Other
Weight：0.08 lb
Size：1.3*0.89*0.83 inch
Heat dissipation method：natural heat dissipation

matters need attention
1.memory：The products are stored in a dry and cool place with a temperature range of-40℃ ~80℃, and avoid contact with corrosive substances, and stay away from fire and heat sources.
2.Do not use it near a heat source (such as a fire or a heater).
3.Do not connect the input line to 220V electricity.
4.Do not put the product into the fire or heat it.
5.Do not short-circuit the positive or negative poles of the product with wires or other metal objects.
6.Non-professional personnel are prohibited to disassemble and repair by themselves.