-15%

MZHOU DC 30-60V to 24V 10A Buck Converter,36/48/60V Step-Down to 24V Voltage power Converter,Supply Converter Transformer for Truck,Car,DIY Project

$28.99
0 sold
168 people are viewing this right now
100 in stock
Trust Badge
Guaranteed safe & secure checkout
MZHOU DC 30-60V to 24V 10A Buck Converter,36/48/60V Step-Down to 24V Voltage power Converter,Supply Converter Transformer for Truck,Car,DIY Project

MZHOU DC 30-60V to 24V 10A Buck Converter,36/48/60V Step-Down to 24V Voltage power Converter,Supply Converter Transformer for Truck,Car,DIY Project

$28.99

Description

  • 30V 36V 48V 60V to 24V DC step-down converter: Input voltage: DC 30-60V; output voltage: DC 24V (fixed output); output current: 10A; output power: 240W. CAUTION: The load connected to the output of the converter should not exceed the specified maximum load. Any larger load will damage the buck converter.
  • EASY INSTALLATION:The 24V voltage regulator is equipped with a lever nut connection for quick connection. No bonding wires are required, which reduces wiring time. Note: Strip 0.4 inches (10 mm or so) of insulation from the wires and insert them into the connector.
  • Intelligent Protection:30-60V to 24V buck converter is equipped with an intelligent chip with intelligent overcurrent/short circuit/overheat protection.To ensure the safety of the device, the converter is equipped with a fuse.
  • Efficient heat dissipation:Waterproof transformer adopts non-isolated synchronous step-down technology, working temperature: -20°-65°, it will change according to the ambient temperature. The transformer is molded, dustproof, waterproof and shockproof.
  • Wide Application:The buck converter can be widely used in car audio, monitoring system, advertising screen, medical equipment, instrumentation, LED light bar, electric fan and DIY etc.

 

 

DC 30-60V to 24V Step-Down Converter Specification:

Input: DC 30-60V

Output: DC 24V 10A (max)

Watertightness: IP68

Operating temperature: -20° to 65°

Storage temperature: -40° to 85°

36V 48V to 24V voltage Buck regulator connection:

Input: Red (+) Black (-)

Output: Yellow (+) Black (-)

Protection: Short circuit protection, over temperature protection, over current protection

(Please note that there is no reverse polarity protection, please wire correctly, otherwise the current may burn out).

DC Voltage Regulator Safety Manual

1. The load connected to the output of the power regulator should not be higher than the maximum load power, any higher load will cause damage to the power regulator.

2. If the ambient temperature is too high, the power should be reduced accordingly, and operating at low temperatures is a guarantee that the power supply will work reliably for a long time.

3. Do not use the device near a heat source such as fire or heater.

4. Do not connect the input cable to the 220 V household mains.

5. Do not place the appliance near a fire or heater.

6. Do not allow non-professionals to disassemble and service the appliance.

7. The input voltage should not exceed the fluctuation range that the converter can withstand.

8. The output power of the converter must be greater than the power required by the connected devices.

9. The positive and negative leads must not be reversed.

Package Contains

1x 30V-60V to 24V 10A 240W voltage converter

Rating & Review

Based on 0 Reviews

There are no reviews yet.

Language »
Select your currency
0